Used Mori-Seiki Lathe Machine
Phone 352-799-8398 - Fax 352-799-0315
sales@moriseikimachines.com
www.used-mori-seiki-lathe.moriseikimachines.com
At Used Mori-Seiki Lathe Machines we never stop working to serve
your machine tool needs
Use Space Provided Below For Your Notes on This Machine Quote
- When Ready - Click File - Then Print on your Browser
Used Mori-Seiki Lathe Machine Quote - Click on the
Machine ID Number Below to View Then Print Machine Photos
Below are the specs we have on file for this machine.
Please contact Mori-Seiki Machines if you have any
questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 16565 | 2013 | Nakamura-Tome | WY-250 L | Fanuc 31iA |
| | Description | Spec Values |
| Capacity: | Swing / Swing Over Cross Slide | 11.2" / 9.84" |
| | Maximum Cutting Diameter (turret one & turret two) | 8.858" |
| | Maximum Turning Length / Distance Between Spindles | 35.8" / 47.24" |
| Main Spindle: | Speeds | 40 - 4,500 RPM |
| | Spindle Bore / Bar Cap / Spindle Nose | 3.15" / 2.55" / A2-6 |
| | Motor (30 min. / cont.) | 18 / 12 HP |
| Sub-Spindle: | Speeds | 50 - 5,000 RPM |
| | Spindle Bore / Bar Cap / Spindle Nose / Indexing | 2.48" / 2" / A2-5 |
| | Motor (30 min. / cont.) | 20 / 15 HP |
| Turrets: | Number of Positions (turret one / turret two) 12 Live x 2 | 24 / 24 Tools Each |
| Travels: | X-Axis Travel (turret one X1 / turret two X2) | 6.31" / 6.5" |
| | Z-Axis Travel (turret one Z1 / turret two Z2) | 35.8" / 35.8" |
| | Y-Axis Travel | 3.8" +/- |
| | B-Axis Travel (sub-spindle) | 24.41" |
| Rotary Tools: | Rotary Tool Speed | 100 - 6,000 RPM |
| | Rotary Tool Motor (30 min. / cont. turret one & turret two) | 7.5 / 5 HP |
| Rapids: | Rapid Traverse (X & B / Z / Y / B) | 709 / 1,575 / 394 IPM |
| | Cutting Feed Rate | 188 IPM |
| Dimensions: | Floor Space (L x W x H) | 193" x 132" x 95" |
| | Weight (approx) | 29,000 Lbs |
| | Equipped With |
| Additional Info.: | Collet Chuck Main Spindle & Sub Spindle |
| | Chip Conveyor |
| | Miscellaneous Tooling |
| | Tool Presetter |
| | Nine (9) Axis Control, Four (4) Simultaneously |
| | Canned Cycle |
| | Circular Interpolation |
| | Custom Macro |
| | Helical Interpolation |
| | Conversational Control |
| | High Pressure Coolant |
| | Overhead Parts Conveyor |
| | Ridig Tapping |
| | Bar Feed Interface |
| | LNS Bar Feed |
| | Prepped For Steady Rest |
| | High Pressure Coolant System |
Type Your Notes About This Machine In The Space
Below Before Printing
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.